Pattern Review: SizeMe Sewing Florence Boxy Tee

Today I want to tell you about one of my favourite tried and tested patterns. There are very few patterns I’ve made again and again but the Florence Boxy Tee from SizeMe Sewing is one of them. I love the flattering cut, the comfortable fit and versatility of this wardrobe staple pattern. It’s a super simple construction and from cutting out to wearable garment it took me 45 minutes. I made myself another one over Christmas from the off cuts from my sister’s present and I decided I would document the process for you all to show you just how quick and easy it is. Also its worth mentioning at this point that this blogpost is not affiliated or sponsored by SizeMe Sewing, I just wanted to share a favourite pattern of mine.

Materials Required:

  • 1m / 1.5m Lightweight Jersey – I used Rust Viscose Jersey from The Rag Shop
  • Florence Boxy Tee Pattern – SizeMe Sewing
  • Sellotape, Scissors & Printer to assemble PDF
  • Matching Thread

Step 1: Neckline

Top Stitched Neckline

Fold the neckline and stitch down front and back. I did this but turning down the neckline where it joins the shoulder and then i did the centre fold and worked my way along each side. It’s important not to stretch your neckline at this point so take it slowly and use lots of pins. Also remember this stitching will be visible so stitch the fold down from the Right Side and lengthen the stitch.

Step 2: Attach Shoulder Seams

Shoulder Seams Joined

Nice and simple step here, the only trick is to make sure you match the neckline correctly and I used a lightening stitch to make sure the seam was nice and secure. A zigzag stitch often puckers on this fabric so I found a lightening stitch to be a lot more effective.

Step 3: Hem Sleeves

Step 4: Attach Sleeves

Carefully matching the edge of the sleeve with the edge of the bodice, pin and stitch. Nice and simple but I used a lot of pins given how light the fabric is and I really had to take my time as the fabric slipped about loads!

Step 5: Close Side Seams

Again, a very simple step, I would recommend pinning at the under arm join to ensure a smooth side seam and even sleeve and base hems. Use your zigzag or lightening stitch for this step as this seam gets a lot of wear and tear so needs to be reinforced. As this jersey is so lightweight, I double stitched my side seams, doing a second row of stitching 1cm away from the first to make sure they won’t split.

Step 6: Hem

Nothing much to say about this step except that you need to press your hem before and after you do it to make sure you get a nice crisp finish (unlike me who forgot to press this at the time however it has been ironed now I promise!).

And you’re done! It really is that simple, this make has never taken me more than an hour and is now a wardrobe staple for me.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s