My Top Tips To Sew Your Own Amaya Shirt

As my YouTube subscribers will know, I have just finished making the Amaya Shirt from Made My Wardrobe. Today I am mopping up, resetting my machine and trying to sort some other little projects/alterations/fixes which have been piling up for a while now. However, before I completely forget how I made it I wanted to share my tips, tricks and honest feedback on my making journey for the Amaya Shirt.

Firstly, here it is in all her gorgeous, flute-sleeved glory. Honestly I would never have thought of making this pattern originally, it was very much the case that the fabric came first. I bought this stunning red spot cotton from The Rag Shop with no clue at all what I was going to make with it. For transparency I almost never do that, I’m always very project lead but I thought, you know what? I’ve got to have it. When I posted about it online and asked for recommendations Steph from The Rag Shop got in touch and suggested the Amaya Shirt. I was intrigued and although its a little out of my comfort zone fashion-wise I decided to take the plunge.

It also took me out of my technical sewing comfort zone. My first proper top stitching, my first raglan sleeves, it was all a journey and I really made myself take my time. Especially as I knew that I didn’t have enough fabric to recut if I made a mistake. I’m really glad I took the time, doing only one or two pattern steps a day for a week. It was a lovely way to wind down from work each day and I feel like this is technically one of the best garments I’ve made because I didn’t rush a single step. So my first and biggest piece of advice I can give you is to take your time with this make, there aren’t many steps but they all require accuracy and care. Below I have linked my vlog so you can join me for every step of the sew and you can also see just how many grey jumpers I own as I change between days.

My Top Tips:

  • Draw The Line For The Front Opening – seriously, do this. I thought I wouldn’t bother but it requires a straight line stitched 4cm in from the edge which is surprisingly hard to do by eye and most machines don’t have markings that go out that far. This was made extra difficult on my fabric as its exceptionally hard to draw a straight line on Swiss Cotton! Regardless draw a solid or dashed line, its worth it for a garment feature that is so front and centre.
  • Really Press The Centre Front Open – While we talking about the centre front…before you start top stitching you absolutely must press it open thoroughly so that your facing and seam doesn’t bulge when you do the top stitching.
  • Finish All The Edges As You Go – Cards on the table, I’m straight up awful at finishing raw edges when I sew, honestly just awful, but I really made the effort with this garment partly because i didn’t want fraying but mostly because it actually really helps with the structure and the strength of the seams. I am particularly highlighting this as something you should as you go along because there are quite a few seams you can’t access once the garment is done if you were hoping to have a tidy up at the end. The pattern recommends overlocking but if you don’t have an overlocker then either you can zigzag or you can go on a voyage of discovery with your sewing machine and find out that it actually has four different overlock stitch options. (It’s the dream)
  • Gather Much Closer To The Neckline Edge Than You Think – Basically if you look at the outside of my garment the bind covers all the gathers, that is quite emphatically not the case on the inside. I did my gathers at the distance recommended by the pattern, or at least i think it did as I work in imperial and it only had metric, but at that distance it was impossible to enclose the gathers properly in the neck binding on both sides. So I would recommend sewing one row in the seam allowance and then other just beyond it. You will still be able to gather and you will be able to enclose both sides in the binding.
  • Go By Your Measurements – so I looked at the finished pattern measurements and was going to make a size down as they looked huge but when I looked at the body measurements I saw that they actually put me in the 10 bracket. I decided to go with the 10 because I would rather it fit my bust properly and then i could adjust other areas but actually i found it to be a really nice fit. its loose but you actually have enough room to move and the sleeves and bust line are both really flattering. My recommendation would be to pick the pattern based on your bust size and then work from there.
  • Print Out The Pattern Instructions And Highlight – For me the pattern instructions required a second and even a third reading as I found the prose of the instructions very unclear. That could just be me but if you do have the same issue I would recommend printing them out and highlighting the action areas just for the sake of clarity. The pattern makes a stunning garment but the instructions could be easier to understand.
  • Use A Fairly Structured Fabric – It really helps with the construction and the fit of this garment. I’m sure you could easily make it out of more slippery fabrics but I think a structured cotton, linen or chambray would be a good starting point for a first make of this garment and would show off its more flattering and exciting features.

Those are my top tips for working with this pattern, its a great pattern and I have worn mine loads since I made it so I would recommend it for all abilities. Check out my sew-a-long vlog below to see how I got on making the Amaya Shirt.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: